Difference between revisions of "StJames"
From Winnipeg Digital Repeater Group HSMM
(Created page with "*Mounting **Until we haul a full sledmount, rubber mat and weights to the top of the building, the small panel and omni are attached to a part of the ladder *Inside equipment...") |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
*Mounting | *Mounting | ||
**Until we haul a full sledmount, rubber mat and weights to the top of the building, the small panel and omni are attached to a part of the ladder | **Until we haul a full sledmount, rubber mat and weights to the top of the building, the small panel and omni are attached to a part of the ladder | ||
+ | |||
*Inside equipment | *Inside equipment | ||
**Actually almost nothing - there is a small cabinet with power outlet inside and PoE, feeding a 350ft run of outdoor cat5e to our mounting location. There is no UPS at present | **Actually almost nothing - there is a small cabinet with power outlet inside and PoE, feeding a 350ft run of outdoor cat5e to our mounting location. There is no UPS at present | ||
**There is no UPS at prevent, finding something that fits in the cabinet could be difficult, else we could go with two 12V batteries and a charger / feed circuit. | **There is no UPS at prevent, finding something that fits in the cabinet could be difficult, else we could go with two 12V batteries and a charger / feed circuit. | ||
+ | |||
+ | |||
+ | *Todo | ||
+ | **install 5.9Ghz backhaul pointed to 55N, and maybe another site. | ||
+ | |||
+ | |||
+ | *picture of site and radios |
Latest revision as of 15:11, 25 October 2015
- Mounting
- Until we haul a full sledmount, rubber mat and weights to the top of the building, the small panel and omni are attached to a part of the ladder
- Inside equipment
- Actually almost nothing - there is a small cabinet with power outlet inside and PoE, feeding a 350ft run of outdoor cat5e to our mounting location. There is no UPS at present
- There is no UPS at prevent, finding something that fits in the cabinet could be difficult, else we could go with two 12V batteries and a charger / feed circuit.
- Todo
- install 5.9Ghz backhaul pointed to 55N, and maybe another site.
- picture of site and radios